Dyson DC24 Head Fitment Guide
Slightly not much worth in scanning this but it was there and fell onto the scanner! This is the 1 pager that comes with new Dyson DC24 Brushroll housings and shows the user how to fit it.
Numatic Henry HVR200 - Stripdown and motor replacement!
I picked this little fellow up from the car boot a few weeks ago for £10. I had been after a diy/car/dirty jobs vac for a while now, and this seemed to fit the bill nicely. However, it had been heavily abused, and had no suction at all so of course I stripped it down! First to be fixed was the hose, I chopped off each broken end and put it back together! As you can hear, he doesnt sound healthy! So, off with his head! Yummy! Found this stuffed deep in the cord rewind system it was VERY dusty! No wonder it blew dust out when turned on Oh, the motor looks fun... I cant believe this still ran! I started unpicking the wiring Cord rewind cables out Thermal cutout for the motor removed identifing the wires one by one Switch and power socket are out Power socket stripped down for cleaning contact rings removed And onto the motor! Carbon holders out 2 bolts under the
Comments
Post a Comment